Comtech EF Data CDM-570 Installation And Operation Manual page 482

CDM-570/570L Satellite Modem with Optional IP Module
Appendix K
K.3.3.1.2.1.2 (ODU) Enable: INFO (Information)
INFO:TX RX HPA LNA Equip
Assembly+SN FW (◄ ►,ENT)
For access to real-time, read-only information displays on the ODU currently in operation: Use the
◄ ► arrow keys to select TX, RX, HPA, LNA, Equip, Assembly+SN, or FW, and then press
ENTER.
The screen shots that follow depict sample configurations – the actual values
and settings will vary and they are dependant on the ODU configuration in use.
Typical for all nested screens, press ENTER or CLEAR to return to the ODU:
Enable
(ODU: Enable) INFO: TX (TRANSMITTER)
TX: ON
AGC: OFF
This screen displays read-only information on the KST-2000A transmitter status: Tx
operating state (ON or OFF); Tx Frequency; Tx Attenuation; and AGC state (ON or OFF).
(ODU: Enable) INFO: RX (RECEIVER)
RX: ON
Ref-Adjust: 228
This screen displays read-only information on the KST-2000A receiver status: Rx operating
state (ON or OFF); Rx Frequency; Rx Attenuation; and Internal Reference adjustment.
(ODU: Enable) INFO: HPA
HPA: On
Fault Logic: No Summary
This screen displays read-only information on the current configuration of the HPA
functions: HPA (ON or OFF) and Fault Logic (Summary or No Summary).
(ODU: Enable) INFO: LNA
LNA: On
Fault Logic: No Summary
This screen displays read-only information on the current configuration of the LNA functions:
LNA (ON or OFF) and Fault Logic (Summary or No Summary).
(ODU: Enable) INFO: Equip (Equipment)
EQUIP-TYPE: KST-2000A
HPA-TYPE: CEFD-SSPA
This screen displays read-only information on the about the currently installed ODU.
INFO menu.
14500.0MHz 19dB
10950.0MHz 15dB
K–20
Revision 12
MN/CDM570L.IOM