CDM-570/570L Satellite Modem with Optional IP Module
Ethernet IP Module - CLI and Telnet Operation
14.2.9
Configuration Page
Activate the Modem Configuration page by selecting Configuration from the Satellite Modem
page.
The Modem Configuration page contains the following options/fields:
Selection
Modem Type
Tx Configuration
Rx Configuration
Framing Mode
Configuration
Data Interface
Configuration
Reference Configuration
Alarm Mask Configuration
BUC Configuration
LNB Configuration
Figure 14-25. Modem Configuration page
Entry
Description
[RO]
Identifies the Modem type – CDM-570 or CDM-570L .
T
Displays the Tx Configuration page.
R
Displays the Rx Configuration page.
F
Displays the Framing Mode Configuration page.
I
Displays the Data Interface Configuration page.
E
Displays the Reference Configuration page.
A
Displays the Alarm Mask Configuration page.
B
Displays the Block Up Converter (BUC) Configuration page.
N
Displays the Low Noise Block Converter (LNB) Configuration page.
14–38
Revision 12
MN/CDM570L.IOM
Need help?
Do you have a question about the CDM-570 and is the answer not in the manual?