Figure 14-3. Name/Password Configuration Page; Name/Password Configuration Page - Comtech EF Data CDM-570 Installation And Operation Manual

CDM-570/570L Satellite Modem with Optional IP Module
Ethernet IP Module - CLI and Telnet Operation
14.2.2.1

Name/Password Configuration Page

Activate the Name/Password Configuration page from the Administration page. Use this page to
define the passwords required to access via HTTP, FTP, and Telnet.
•
•
•
•
•
The Name/Password Configuration page contains the following options/fields:
Selection
Admin User/Password
Read/Write
User/Password
Read Only User/Password

Figure 14-3. Name/Password Configuration page

All Usernames and Passwords are case sensitive.
There is a minimum of 1 and maximum of 11 characters.
Any or all of the Usernames and Passwords can be removed by entering
"NONE NONE" from the CLI or Telnet.
Removing all Usernames and Passwords would only allow access to the
IP functions when connected via the Terminal Emulator (serial)
connection (because there is no log in).
FTP access is restricted to Admin Username/Password only. FTP is only
used to upgrade the IP SOFTWARE or to load or retrieve the IP Parameter
or IP Event log files.
Entry Description
A
Enter the user name and password with a space delimiter.
W
Example: <user> <passwd>
Enter NONE NONE to erase
R
14–6
Revision 12
MN/CDM570L.IOM