Comtech EF Data CDM-570 Installation And Operation Manual page 254

CDM-570/570L Satellite Modem with Optional IP Module
Ethernet IP Module Interface
Use the option buttons to select the following:
•
Filter (F) – Click Yes or No to allow/disallow flow filtering.
•
WRED (W) – Click Yes or No to allow/disallow Weighted Random Early Detection.
•
Add/Change – Click to add a QoS flow rule or modify an existing QoS flow rule. Click
[Submit] to add the entry to the QoS Rules table for processing.
•
Delete – Click to flag a flow rule for removal from the QoS Rules table. Click [Submit]
to delete the flow rule from the QoS Rules table.
Use the drop-down menus to select the following:
•
Protocol Rule – Select the desired protocol rule as per the QoS Hierarchy Rule Protocol
table featured in Sect. 13.4.5.1.
•
Priority Level (P) – Select the desired packet forwarding priority – Priority 1 (Highest)
through Priority 8 (Lowest).
•
Default QoS Rule Filter – Select Enable or Disable.
•
Sort By – Select the QoS Rules table column by which to re-order as needed.
Click [Submit] to save the rules settings changes made on this page.
QoS Rules
This read-only window displays the currently active QoS flow rules. The table sorts each QoS
rule as it has been added, and the display is updated to reflect the order with which rules are
matched; the columns for the rules are additionally sorted via the Sort By drop-down menu
explained previously.
13–48
Revision 12
MN/CDM570L.IOM