Info: Ref (Frequency Reference); Info: Id (Circuit Id); Info: 1:1 (1:1 Redundancy); Select: Save/Load - Comtech EF Data CDM-570 Installation And Operation Manual

CDM-570/570L Satellite Modem with Optional IP Module
Front Panel Operation
5.2.2.4.9

INFO: Ref (Frequency Reference)

Frequency Reference:
Internal 10 MHz (ENTER)
This screen displays the source of the frequency reference for the CDM-570/570L.
5.2.2.4.10

INFO: ID (Circuit ID)

Circuit ID:
24 CHARACTER TST MESSAGE
This screen displays the user-defined Circuit ID string that is composed via the UTIL: ID
submenu.
5.2.2.4.11

INFO: 1:1 (1:1 Redundancy)

Redundancy State:Standby
Serial 1:1 Link: Active
•
On the top line: This screen displays the Redundancy State (1:1 or 1:N) as Online or
Standby
•
On the bottom line: The status of the serial link between the two units is indicated as Active
or Idle.
5.2.2.5

SELECT: Save/Load

Save/Load Configuration:
Save Load
This menu branch allows the storing or loading of up to 10 different modem configurations (0
through 9) in the non-volatile memory of the modem. Use the
Load, and then press ENTER.
5.2.2.5.1

Save/Load Configuration: Save

Use the arrow keys to select the location where the current configuration is to be stored,
▲ ▼
and then press ENTER. Locations 0 through 9 are available.
Using Location 9 for this example:
If Save is selected and the chosen location is empty, the screen appears as follows:
Save Config to Loc: 9
Empty
(ENTER)
(◄ ►,ENTER)
(▲ ▼)
5–44
MN/CDM570L.IOM
◄ ►
arrow keys to select Save or
Revision 12