Maint | Unit Info ......................................................................................................... 13–61; Maint | Operations ....................................................................................................... 13–62; Maint | Save ................................................................................................................ 13–63; Maint | Reboot ............................................................................................................. 13–64 - Comtech EF Data CDM-570 Installation And Operation Manual

CDM-570 Satellite Modem with Optional IP Module
Base Modem Web Server Interface
7.3.3.3 Config Mdm | AUPC
For details pertaining to AUPC configuration and operation, see Chapter 9.
AUTOMATIC UPLINK POWER CONTROL (AUPC).
Use this page to configure Automatic Uplink Power Control (AUPC).
With AUPC, a local modem is permitted to adjust its own output power level in order to attempt
to maintain the E
AUPC
•
AUPC Enable: Use the drop-down menu to select AUPC operation as either Enabled or
Disabled.
•
Rem Demod Target E
•
Tx Power Max Increase: Use the drop-down menu to select a value, in dB, from 0 to 9.
•
Max Pwr Reached Action: Use the drop-down menu to set the action as No Action or
Generate Tx Alarm.
•
Rem Demod Unlock Action: Use the drop-down menu to set the action as Go to Nominal
Power or Go to Maximum Power.
Click [Submit] to save changes made to this page.

Figure 7-10. Config Mdm | AUPC page

/N at the remote modem.
b 0
: Type in a value, in dB, from 0.0 to 14.9.
/N
b 0
7–14
Revision 12
MN/CDM570L.IOM