Comtech EF Data CDM-570 Installation And Operation Manual page 294

CDM-570/570L Satellite Modem with Optional IP Module
Ethernet IP Module - CLI and Telnet Operation
Selection
Specify priority for the rule
Maximum bandwidth in kbps
<0 – 99999, enter =
99999>:
Source IP address
<enter = 0.0.0.0>:
Number of source subnet
bits <0,8-32, enter = 0>:
Destination IP address
<enter = 0.0.0.0>:
Number of Destination
subnet bits
<0,8-32, enter = 0>:
Specify TCP/UDP source
port [MIN]
(1 – 65535) <Enter: ***>
Specify TCP/UDP source
port [MAX]
(1 – 65535) <Enter: ***>
Specify TCP/UDP
destination port [MIN]
(1 – 65535) <Enter: ***>
Specify TCP/UDP
destination port [MAX]
(1 – 65535) <Enter: ***>
Set WRED (Weighted
Random Early Discard)
<Y or N> <Enter : Y>
Specify Filtering for the rule
<Y or N> <Enter : N>
Delete
Base [1]
QoS [ ]
Entry Description
1 – 8 Priority 1 – Highest, Priority 8 – Lowest:
1 for QoS Priority-1
2 for QoS Priority-2
3 for QoS Priority-3
4 for QoS Priority-4
5 for QoS Priority-5
6 for QoS Priority-6
7 for QoS Priority-7
8 for QoS Priority-8
0 – Enter desired Maximum Bandwidth in kbps.
99999 If no Maximum is desired, select enter, Bandwidth is displayed as '99999'
x.x.x.x Enter desired Source IP Address or subnet.
If no Source IP is desired, select enter, Source IP is displayed as '***'
0, Enter desired Source subnet bits.
8 – 32 If no Source subnet is desired, select enter, Source subnet is displayed as '/*'
x.x.x.x Enter desired Destination IP Address or subnet.
If no Destination IP is desired, select enter, Destination IP is displayed as '***'
0, Enter desired Destination subnet bits.
8 – 32 If no Destination subnet is desired, select enter, Destination subnet is
displayed as '/*'
1 – Enter desired TCP/UDP source port (or Min port of a range).
65535 If no TCP/UDP source port is desired, select enter, Source port is displayed
as '***'
1 – Enter desired TCP/UDP source port (or Max port of a range).
65535 Will not display if no MIN TCP/UDP source port was selected.
1 – Enter desired TCP/UDP destination port (or Min port of a range).
65535 If no TCP/UDP destination port is desired, select enter, Destination port is
displayed as '***'.
1 – Enter desired TCP/UDP destination port (or Max port of a range).
65535 Will not display if no MIN TCP/UDP destination port was selected.
Y or N Select to enable Weighted Random Early Detect.
Y or N Select to prevent traffic defined in rule to be forwarded.
Default N = not filtered
D Enter the QoS Rule to delete <1...32>
B Select Base to view, edit, or display a different set of 8 QoS Rules.
For example, if 8 QoS Rules have been defined, add a new rule by selecting
B 9. The QoS Configuration page will refresh and now display QoS Rules
9-16.
[RO] Displays state of QoS option – Unavailable, Enabled Disabled. If available,
QoS is Enabled or Disabled from the Administrator Features page.
14–24
Revision 12
MN/CDM570L.IOM