Comtech EF Data CDM-570 Installation And Operation Manual page 445

CDM-570/570L Satellite Modem with Optional IP Module
Appendix G
Figure G 4 shows a Router Mode, Point-To-MultiPoint network using Streamline Encapsulation.
This is functionally identical to the Point-To-MultiPoint network using HDLC, except that it
requires no configuration of HDLC addressing on the CDM-570/L-IPs.
The working mode for each modem needs to be set as follows:
•
Hub CDM-570/L-IP Modem – Router-Hub
•
Hub CDD-564/L IP Quad Demodulator – Router
•
Remote CDM-570/L IP Modem – Router-Remote
The Route Table entries are as follows:
•
Hub CDM-570/L-IP Modem – One Route entry for each IP subnet at each remote site
•
Hub CDD-564/L Demodulator – An Ethernet default route with a Next Hop being the
IP of the Hub CDM-570/L
•
Remote CDM-570/L IP Modem – A Satellite default route.
G–9
Revision 12
MN/CDM570L.IOM