Comtech EF Data CDM-570 Installation And Operation Manual page 412

CDM-570/570L Satellite Modem with Optional IP Module
Appendix E
Command
Parameter (Instruction
Type Code and
Qualifier)
Route Table
(cont.)
Number of route N/A RTN=3 bytes,
entries numerical
Delete route entry RTD= RTD=4 bytes,
numerical
Route Table Get N/A N/A
Arguments for
Command or
Response to
Query
Note: To be able to set/get the route entries, the system should be in the
routing. It may return RTE!, if system is in Managed Switch mode.
Query only.
Returns the number of route entries in the route table.
Note: This command should be issued whenever a new route is added/deleted.
Command only.
Deletes the route entry at the specified index number, if configured. Returns
RTD!, if there is no route at the index.
Query only.
Get the whole Routing Table of the modem. Each route entry is separated by '\r'
[chr(13)]
The route table will be displayed only if system's working mode is "Router –
Small, Router-Large, Router-PtP. If the system is in Managed Switch mode, it
may return RCG!
Description of Arguments
E–26
MN/CDM570L.IOM
Query
Response to
(Instruction Code
Command
and Qualifier)
RTN = RTN? RTN = xxxx
RTN! (see description of
arguments)
RTD = RTD! RTD = xx.xx
(see description of
arguments)
RCG! RCG? RCG=
xxxxxxxxxxxxxx
xxxxxxxxxxxxxx
Revision 12
Response to
Query