Comtech EF Data CDM-570 Installation And Operation Manual page 259

CDM-570/570L Satellite Modem with Optional IP Module
Ethernet IP Module Interface
•
The Native VLAN ID is used to tag arriving packets that have no VLAN tag. Likewise,
when packets arrive from the WAN with the same VLAN tag as the Native VLAN ID,
then the VLAN header is removed and passed to the LAN interface.
•
The Management VLAN ID us used to specify a dedicated management VLAN used to
access and control the modems.
For either Native or Management VLAN ID configuration, enter the following information:
•
VLAN ID – Specifiy a value from 1 to 4095.
•
VLAN Name – Assign a string to label the VLAN ID as needed for user convenience.
•
Priority – Use the drop-down menu to select prioritize rules from 0 to 7.
Click [Submit] to save the changes made in this section.
VLAN Table
This read-only table lists the VLAN rules by ID, Name, and Tag.
VLAN Table – Add/Delete
•
VLAN ID – Enter an ID for the rule. Specifiy a value from 1 to 4095.
•
VLAN Name – Enter a name for the rule (a maximum of 20 characters is allowed).
•
Type – Tagged is the only rule option available at this time.
•
Add – Click to add a VLAN priority rule. Click [Submit] to add the entry to the VLAN
Table for processing.
•
Delete – Click to flag a VLAN priority rule for removal from the VLAN Table. Click
[Submit] to delete the VLAN rule from the VLAN Table.
Click [Submit] to save the changes made in this section.
13–53
Revision 12
MN/CDM570L.IOM