Comtech EF Data CDM-570 Installation And Operation Manual page 398

70/140 mhz satellite modem, l-band satellite modem, reduced chassis depth l-band satellite modem
Hide thumbs Also See for CDM-570:
Table of Contents

Advertisement

CDM-570/570L Satellite Modem with Optional IP Module
Appendix E
Command
Parameter
(Instruction
Type
Code and
Response to Query
Qualifier)
Telnet Enabled
TLE=
1 byte, value of 0 or
1
SNMP Enabled
SPE=
1 byte, value of 0 or
1
Downlink Route All
DRM=
1 byte, 0 or 1
Multicast
Transmit DES
TDE=
1 byte, value of 0, 1,
enable/disable
2 or 3
TX Header
THE=
1 byte, value of 0, 1,
Compression
2 or 3
enable/disable
RX Header
RHE=
1 byte, value of 0, 1,
Compression
2 or 3
enable/disable
Arguments for
Command or
Command or Query, where:
0=Disabled
1= Enabled
Enables or disables the telnet interface. When disabled, log in to the telnet
interface is prohibited.
Command or Query, where:
0=Disabled
1= Enabled
Enables or disables the SNMP interface. When disabled, use of the SNMP
interface is prohibited.
Command or Query, where:
0=Disabled
1=Enabled
Enable/Disable Downlink Route All Multicast option.
Command or Query, where:
0=Disabled
1= Enabled (Managed Switch Only mode)
2= PerRoute (read-only when FAST feature is purchased in router mode)
3 = Unavailable (read-only when FAST feature not purchased)
Acts as command, only in Managed Switch mode. In router mode, it's read-only.
Enables or disables the Transmit 3xDES feature.
Restriction: Cannot enable if the 3xDES FAST feature has not been purchased
Command or Query, where:
0=Disabled
1= Enabled (Managed Switch Only mode)
2 = PerRoute (read-only when FAST feature is purchased in router mode)
3 = Unavailable (read-only when FAST feature not purchased)
Acts as command, only in Managed Switch mode. In router mode, it's read-only.
Enables or disables the Transmit 3xDES feature.
Restriction: Cannot enable if the 3xDES FAST feature has not been purchased
Command or Query, where:
0=Disabled
1= Enabled
Enables or disables the Transmit 3xDES feature.
Restriction: Cannot enable if the 3xDES FAST feature has not been purchased
Description of Arguments
E–12
Revision 12
MN/CDM570L.IOM
Query
Response to
(Instruction Code
Command
and Qualifier)
TLE =
TLE?
TLE =x
TLE!
(see description of
arguments)
SPE =
SPE?
SPE =x
SPE!
(see description of
arguments)
DRM=
DRM?
DRM=x
DRM!
x – 0 or 1.
TDE =
TDE?
TDE =x
TDE!
(see description of
arguments)
THE =
THE?
THE =x
THE!
(see description of
arguments)
RHE =
RHE?
RHE =x
RHE!
(see description of
arguments)
Response to
Query

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cdmr-570lCdm-570l

Table of Contents