Activation Procedure; Serial Number; View Currently Installed Features; Enter Access Codes - Comtech EF Data CDM-625 Installation And Operation Manual

CDM-625 Advanced Satellite Modem
FAST Activation Procedure
C.2

Activation Procedure

C.2.1 Serial Number
Obtain the Modem serial number as follows:
a) From the front panel main menu, select
b) The Modem motherboard Serial Number is displayed on the bottom line, to the left.
c) Record serial number:
C.2.2 View currently installed features
To view the currently installed features, proceed as follows:
a) From the front panel main menu, select
b) From the
c) Scroll through the Modem Options using the up and down arrow keys (▲▼), and
note which options are 'Installed' or 'Not Installed'. Any that are 'Not
Installed' may be purchased as a FAST upgrade.
Contact a Comtech EF Data sales representative to order features. You will be asked to provide
the Modem Serial Number. Comtech EF Data Customer Support personnel will verify the order
and provide an invoice and instructions, including a 20-character configuration code.
C.2.3 Enter Access Codes
Enter the access codes as follows:
a) Press [CLEAR] to return to the
b) Select
c) Use the arrow keys (▲,▼,◄,►) to carefully enter the 20-character configuration
code.
d) Press [ENTER].
If everything has been entered correctly, the display will show "
and the modem resets to its default configuration. If the code was not considered valid, the
message "FAILED TO
FAST OPTIONS
, then press [ENTER].
SET
CONFIGURE. RE-ENTER CODE
MN-0000036 (Ref MN/CDM625.IOM)
then press [ENTER].
FAST,
, then press [ENTER].
FAST
menu, select , then press [ENTER].
VIEW
menu.
FAST OPTIONS
CONFIGURED CORRECTLY
" will be shown.
C–2
Revision 1
"