Comtech EF Data CDM-570 Installation And Operation Manual page 397

CDM-570/570L Satellite Modem with Optional IP Module
Appendix E
Command
Parameter (Instruction
Type Code and
Response to Query
Qualifier)
ReadOnly ROU= 11 bytes
UserName No spaces allowed.
ReadOnly ROP= 11 bytes
Password No spaces allowed.
Access Client List ACL= 18 bytes,
numerical
Access List Delete ACD=x 1-byte numerical
1...4
IGMP IGE= 1 byte, value of 0 or
enable/disable 1
Access List ACE= 1 byte, value of 0 or
Enforcement 1
Ping Reply Enabled PRE= 1 byte, value of 0 or
1
Arguments for
Command or
Command or Query.
Change the ReadOnly username, where:
Example: ROU =comtech
To get the new user name effective, ROP must be issued
Immediately after ROU.
Command or Query.
Change the ReadOnly password, where:
Example: ROP =comtech
Command or Query.
Used to set the Access list entry, which contains a subnet and mask. Once the
access list is enabled, only devices from the allowed ranges are allowed to
communicate with the modem.:
xxx.xxx.xxx.xxx/yy, where:
xxx.xxx.xxx.xxx is the IP address, and
yy is the network prefix (0-31)
Returns 000.000.000.000/32 when a particular Access Client is not configured.
Example: <1/ACL[1]=010.006.030.001.24
Command only.
Delete the specified access list entry from the access list table.
<1/ACD=x, where x is value of 1...4
Command or Query, where:
0=Disabled
1= Enabled
Enables or disables the IGMP feature.
Command or Query, where:
0=Disabled
1= Enabled
Enables or disabled access list enforcement.
Command or Query, where:
0=Disabled
1= Enabled
Enables or disables ping reply. When disabled, the modem will not respond to
pings (network security feature)
Description of Arguments
E–11
Revision 12
MN/CDM570L.IOM
Query
Response to
(Instruction Code
Command
and Qualifier)
ROU = ROU? ROU =xxxxxxxxxx
ROU! (see description of
arguments)
ROP = ROP? ROP =xxxxxxxxxxx
ROP! (see description of
arguments)
ACL = ACL? ACL=
ACL! xxx.xxx.xxx.xxx.yy
(see description of
arguments)
ACD= N/A ACD=x [1..4]
ACD! (see description of
arguments)
IGE = IGE? IGE =x
IGE! (see description of
arguments)
ACE = ACE? ACE =x
ACE! (see description of
arguments)
PRE = PRE? PRE =x
PRE! (see description of
arguments)
Response to
Query