Param Files - Comtech EF Data CDM-570 Installation And Operation Manual

CDM-570/570L Satellite Modem with Optional IP Module
Appendix E
E.6

PARAM Files

This section gives more detail about the possible values of various parameters in the PARAM file.
Parameter File Tag
SYS_WORKING_MODE
EASYCON_MCAST_MODE
HDR_REFRESH_UDP_RTP1
HDR_REFRESH_UDP
HDR_REFRESH_ALL_OTHERS
PAYLOAD_REFRESH
TELNET_TIMEOUT
QOSMODE
DYNBUF_LATENCY
Rt#0 .... Rt#nnn
ROUTE_HDLC_ADDR_SAVE
Values Associated with Parameter
Possible values are:
Router Mode
Managed Switch Mode
Enabled
Disabled
Decimal Value of 1...600
Decimal Value of 1...600
Decimal Value of 1...600
Decimal Value of 1...600
Decimal Value of 1...60 Minutes
Possible values are:
Rule-Max/Pri Mode
Rule-Min/Max Mode
DiffServ Mode
Decimal value of 200 to 5000 mSec.
Route table entries Rt#0 is the first entry and can go up to 256 entries.
[No need to read this from param file, use RTG]
Corresponding HDLC Addresses for Ethernet Sat entries. [No need to read this from param file, use RTG]
E–32
Revision 12
MN/CDM570L.IOM