Figure 14-48. Diagnostics Page; Diagnostics Page - Comtech EF Data CDM-570 Installation And Operation Manual

CDM-570/570L Satellite Modem with Optional IP Module
Ethernet IP Module - CLI and Telnet Operation

14.2.11.5 Diagnostics Page

Activate the Diagnostics Page from the Operations and Maintenance page.
Using Dump Packets Diagnostics Utilities
1. The Dump Packet Utilities will display a hexadecimal representation of each
packet and
2. Selecting the menu option a second time terminates the dump operation.
Each selection toggles the value of the dump engine.
The Diagnostics Page contains the following options/fields:
Selection
Dump Packets transmitted
to Satellite Interface
Dump Packets received
from Satellite Interface
Dump Packets transmitted
to Ethernet Interface
Dump Packets received
from Ethernet Interface
Dump Packets received
by Router
Dump Packets sent to
EndStation

Figure 14-48. Diagnostics Page

should not
be used when the
Entry Description
T Toggle [Yes] or [No].
Forces the IP Module to dump a hexadecimal representation of each packet
transmitted over the Satellite Interface.
R Toggle [Yes] or [No].
Forces the IP Module to dump a hexadecimal representation of each packet
received from the Satellite Interface.
U Toggle [Yes] or [No].
Forces the IP Module to dump a hexadecimal representation of each packet
transmitted to the Ethernet Interface.
V Toggle [Yes] or [No].
Forces the IP Module to dump a hexadecimal representation of each packet
received from the Ethernet Interface.
B Toggle [Yes] or [No].
Forces the IP Module to dump a hexadecimal representation of each packet
received by the routing engine.
Note: Does not apply when in Managed Switch Mode.
G Toggle [Yes] or [No].
Forces the IP Module to dump a hexadecimal representation of each packet
received by and destined for this modem. This traffic includes Pings, SNMP,
Telnet, HTTP, and FTP traffic types.
14–67
MN/CDM570L.IOM
IP M
odule is on a "live" network.
Revision 12