Comtech EF Data CDM-570 Installation And Operation Manual page 471

CDM-570/570L Satellite Modem with Optional IP Module
Appendix K
(ODU SELECT) ODU CONFIG: ODU TX
ODU Tx Mute State:
Muted
Use the
(ODU SELECT) ODU CONFIG: ODU TX
ODU Tx Slope Mode:
Manual
Use the
(ODU SELECT) ODU CONFIG: ODU TX
ODU Tx Slope:
0.0
Use the
(ODU SELECT) ODU CONFIG: Receiver
ODU RX: Frequency Atten
Mute Slope
◄ ►
Use the
ENTER.
(ODU SELECT) ODU CONFIG: ODU RX
ODU Rx Frequency:
5912.5 MHz (
To edit the receiver frequency: First, use the
then use the
(ODU SELECT) ODU CONFIG: ODU RX
ODU Rx Attenuation:
15.00 dB
To edit the receiver attenuation: First, use the
then use the
(ODU SELECT) ODU CONFIG: ODU RX
ODU Rx Mute State:
Muted
Use the
Unmuted (◄ ►,ENT)
◄ ► arrow keys to select Muted or Unmuted, and then press ENTER.
Calibrated
◄ ► the arrow keys to select Manual or Calibrated, and then press ENTER.
▲ ▼,
(
▲ ▼ arrow keys to edit the transmit slope setting, and then press ENTER.
◄ ►
( ,ENT)
the arrow keys to select Frequency, Atten, Mute, or Slope, and then press
◄ ►,▲ ▼,
▲ ▼ arrow keys to change the value of that digit. Press ENTER when done.
(◄ ►,▲ ▼,ENT)
▲ ▼
arrow keys to change the value of that digit. Press ENTER when done.
Unmuted (◄ ►,ENT)
◄ ►
arrow keys to select Muted or Unmuted, and then press ENTER.
Mute
Slope
(◄ ►)
Slope
ENT)
Frequency
ENT)
◄ ►
arrow keys to select a digit to edit, and
Atten (Attenuation)
◄ ► arrow keys to select a digit to edit, and
Mute
K–9
Revision 12
MN/CDM570L.IOM
Manual