Comtech EF Data CDM-570 Installation And Operation Manual page 481

CDM-570/570L Satellite Modem with Optional IP Module
Appendix K
(ODU: Enable) KST CONFIG: KST MISC
AGC MODE:
Off
Use the ◄ ► arrow keys to select OFF, ON or BURST, and then press ENTER.
(ODU: Enable) KST CONFIG: KST MISC
Internal Ref Adjustment:
087
To edit the INT 10MHz REF setting: Use the ▲ ▼ arrow keys to select a value – the
values scroll from 000 to 255 – then press ENTER.
On Burst (◄ ►,ENT)
(▲ ▼,ENT)
The INT REF is adjusted in the factory to be very accurate with the
default setting of 028. This parameter is made available to
compensate for the long-term frequency drift of the oscillator.
K–19
MN/CDM570L.IOM
AGC
Ref-Adjust
Revision 12