View/Display; Measurement Results View - Agilent Technologies X Series Manual

View/Display

This measurement has only one view, so there are no View Selection keys in this menu. For details of the
measurement's view, see
This menu includes a
Display
related to the display of the analyzer. See
Key Path
Initial S/W Revision

Measurement Results View

The figure below shows an example of the view for the Complex Spectrum Measurement.
• The upper Spectrum Window shows the trace of the signal and its average in the frequency domain.
For details, see "Spectrum Window" on page
• The lower I/Q Spectrum Window shows the traces of the I and Q of the input signal. For details, see
"I/Q Waveform Window" on page
• The measured values for the mean power and peak-to-mean power are shown in the text window.
"Measurement Results View" on page 277
key, which accesses a menu that allows you to control certain functions
"View/Display" on page 613
Front-panel key
Prior to A.02.00
278Waveform Window.
Complex Spectrum Measurement
View.
for more information.
278.
View/Display
277