Configure Rip Routetimeout - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

configure rip routetimeout

configure rip routetimeout {<seconds>}

Configures the route timeout period.

Syntax Description

Specifies a time in seconds.

180 seconds.

Usage Guidelines

If a router does not receive an update message from its neighbor within the route timeout period (180

seconds by default), the router assumes the connection between it and its neighbor is no longer

The following example sets the route timeout period to 120 seconds:

configure rip routetimeout 120

This command was available in ExtremeWare 2.0.

Platform Availability

This command is available on all platforms.

ExtremeWare Software 7.3.0 Command Reference Guide

Extremeware 7.3.0