Table of Contents
Advertisement
Configuration
Setup of DS0 Management Channel
Remote Site B Configuration
Command
disconnect a
set a:1:all type data
set a:2:all type data
disconnect 6
set 6:1:all type data
connect a:1:6-9 a:2:1-4
connect a:1:11-24 6:1:11-24
set ipds0 assign a:1:10
set ipds0 ip address
192.168.1.102 255.255.255.0
set ipds0 up
set ipds0 navalarm off
set snmp nms 1 192.168.0.254 Set up SNMP Trap address for the Compact T1
4-20
Description
Disconnects all connections to slot a (controller)
Sets all DS0s on T1-1 to data signaling type
Sets all DS0s on T1-2 to data signaling type
Disconnects the router in slot 6
Sets all DS0s on slot 6 to data signaling type
Connect channels to cell site
Connect channels for outgoing T1 port
Assign channel to IPDS0 management channel
Configure IPDS0 ip address
Enable IPDS0
Suppress IPDS0 alarm
Compact T1 - Release 6.1
Advertisement
Table of Contents
