Table of Contents
Advertisement
CLI Commands
set
set (router) ppp security
Use the set (router) ppp security command to set up the local external security server, that the
Router will use to authenticate remote PPP devices.
set (router) ppp security address
Syntax:
Example:
{rtr_card-addr}
The slot number (1-6) that contains the Router (IP or CMG) card.
{ip-addr}
The IP address, in the form of xxx.xxx.xxx.xxx, where xxx is between 0-255.
set (router) ppp security password
Syntax:
Example:
{rtr_card-addr}
The slot number (1-6) that contains the Router (IP or CMG) card.
{"password"}
A password with a maximum of 15 characters. Password must be enclosed in quotes.
5-132
set {rtr_card-addr} ppp security address
{ip-addr}
set 5 ppp security address 10.1.1.1
The example will set external security server address to 10.1.1.1, for the Router
in slot 5.
Note: A set (router) ppp security server command must be completed before
this command can be implemented.
set {rtr_card-addr} ppp security password {"password"}
set 5 ppp security password "public"
The example will set the password to a local external security server to "public",
for the Router in slot 5.
Note: A set (router) ppp auth by remote protocol command must be
completed before this command can be set.
Compact T1 - Release 6.1
Advertisement
Table of Contents
