SNMP Interface
SNMP Trap Reports
SNMP Trap Reports
The Commpact T1 can send the following SNMP trap reports.
Standard Traps
Trap
authenticationFailure
linkDown
linkUp
coldStart
A-8
Description
Occurs when a bad community string is
used.
Sent when a DS1 changes from an up (in-
service) state to a down (out-of-service)
state. It is not sent when a DS1 is set
"down" by a manual command.
Also sent when a DS1 is set up manually, if
it is in an out-of-service state.
Sent when a DS1 changes from a down
(out-of-service) state to an up (in-service)
state. It is not sent when a DS1 is set "up"
by a manual command.
Sent whenever the SNMP agent is restarted
as a result of a software reset or unit power-
up.
Test Method
Attempt a Get or Set
using an invalid
community string.
Disconnect an in-service
DS1.
Connect a DS1 and put it
into service.
Cycle the power off and
on.
Compact T1 - Release 6.0