Table of Contents
Advertisement
CLI Commands
show
show autoexit
Use the show autoexit to display whether autoexit is on or off. If on, the time-out period is
displayed.
Syntax:
Example:
show (bri)
Use the show (bri) to display settings for BRIs.
Syntax:
Example:
> show 3:1
SLOT 3:
Settings for BRI Port 1:
{bri-addr}
The BRI address is in the form {slot:port}. Where {slot} displays connections for an entire
slot, {slot:port} for a port within a given slot.
slot
port
5-208
show autoexit
show autoexit
> show autoexit
Autoexit is off.
show {bri-addr}
show 3:1
The example will display the settings for port 1 (BRI) on slot 3.
Mode:
Up/Down:
CRV:
Performance Sync Source:
Auto Activate:
Performance Threshold Settings
errored seconds:
severely errored seconds:
Slot number (1-6) where the BRI card is located
Port number, range or all.
LT4TO1TDM
UP
31
ADIT
OFF
1 hour
1 day
------
------
40
10
Compact T1 - Release 6.1
100
25
Advertisement
Table of Contents
