Set (Router-Voice) Default - Black Box Compact T1 MT850A User Manual

set (router-voice) default

Use the set (router-voice) default command to reset all CLI accessible options for one or more
CMG voice channels to their defaults. Defaults are set for algorithm preference, compander,
echo cancellation, echo tail, endpoint prefix, endpoint suffix, silence suppression and TOS. This
command applies to the CMG Router card only.
Syntax:
Example:
{cmg_voice-addr}
In the form {slot:voip:port}
slot
voip
channel
Compact T1 - Release 6.1
set {cmg_voice-addr} default
set 2:1:1:1-4 default
The example will reset voice channel provisioning to defaults for voice
channels 1-4 on the CMG card in slot 2.
The slot number (1-6) that contains the CMG card.
To designate VoIP 1:1 is used.
Channel number for the router is 1-48, range or all
CLI Commands
set
5-171