clear (router) ip address table
Use the clear (router) ip address table command to flush the learned entries from the IP
address table for the specified interface from the specified Router card.
Syntax:
Example:
{rtr_card-addr}
The slot number (1-6) that contains the Router (IP or CMG) card.
["profile-name"]
The name for the Router interface profile. This name must be enclosed in quotes, with a
maximum of 11 characters. Note: the profile-name is optional, if not specified the tables
for all interfaces will be cleared.
clear (router) log
Use the clear (router) log command to clear the CMG event log on the CMG card. This
command applies to the CMG Router card only.
Syntax:
Example:
{cmg_card-addr}
The slot number (1-6) that contains the CMG card.
Compact T1 - Release 6.1
clear {rtr_card-addr} ip address table
["profile-name"]
clear 2 ip address table
The example will clear all the entries on the IP address table.
clear {cmg_card-addr} log
clear 2 log
The example will clear the event log.
CLI Commands
clear
5-33