Configuration
Basic System Setup
Set Up a DS0/Channel
Use the following commands to set up a DS0. See the set (ds0) command for details.
Command
set {slot:port:channel} up
set {slot:port:channel} signal
{ls|gs|emw|emdw|emicpd|dpt}
set {slot:port:channel} type
{data|voice}
Set Up an Analog Port
Use the following commands to set up an analog port.
Command
set {slot:port} up
set {slot:port} signal
{dpt|gs|gsrb|gsw|gswrb|ls|
lscpd|lsrb}
set {slot:port} rxgain {n}
set {slot:port} txgain {n}
4-6
Description
Activate the channel
Set the signaling option for the channel
Set the channel type
Description
Activate the port. See set (ds1) command
for details
Set the signaling option for the port. See the
set (fxs5G) or set (fxo) command for details
Set the receive gain/loss in dB. See the set
(fxs5G) or set (fxo) command for details
Set the transmit gain/loss in dB. See the set
(fxs5G) or set (fxo) command for details
Compact T1 - Release 6.1