Table of Contents
Advertisement
Router (CMG) Card
Card Configuration
l
set (router) lmi
Specify the Local Management Interface (LMI) protocol to use for the
Router
l
set (router) log
Set password access on the Router card (access level, password)
l
set (router) login auth
Sets how login authentication for this router should be performed
l
set (router) login prompt
Enable/disable the suppression of the Router login prompt for a user that
telnets in from the Controller CLI
l
set (router) mgcp
Set Media Gateway Call Protocol (MGCP) parameters
l
set (router) ntp
Set Network Time Protocol (NTP) parameters
l
set (router) password
Manage password access on the specified Router card
l
set (router) ppp auth
Configure the PPP (Point-to-Point Protocol) authentication
l
set (router) ppp security
Set the local external security server that the router will use to authenticate
remote PPP devices
l
set (router) priority tos
Configure parameters that will be used to recognize routed voice packets
which will be handled with higher priority over other routed data
l
set (router) proxy
Enable/disable proxy ARP mode
l
set (router) reboot
Set automatic reboot after an upload of code or configuration file
l
set (router) rip
Specify version of RIP packets to transmit and receive
l
set (router) snmp
Set the SNMP contact, location, name and statistics averaging interval
14-12
Compact T1 - Release 6.1
Advertisement
Table of Contents
