Set (Router-Lan) Framing - Black Box Compact T1 MT850A User Manual

CLI Commands
set

set (router-lan) framing

Use the set (router-lan) framing command to specify which ethernet frame types are supported
on the LAN interface.
Syntax:
Example:
{rtr_lan-addr}
The Router (IP or CMG) address is in the form {slot:port} or {slot "profile-name"}.
slot
port
"profile-name"
{ipx|other}
ipx
other
{ethii|ieee8022|ieee8023|snap}
ethii
ieee8022
ieee8023
snap
{disable|enable}
disable
enable
5-156
set {rtr_lan-addr} framing {ipx|other}
{ieee8022|ieee8023|ethii|snap} {disable|enable}
set 3:1 framing ipx ieee8022 enable
The example will enable the 802.2 frame type for IPX packets on the LAN of
the Router card in slot 3.
The slot number (1-6) that contains the Router card.
Port number of the Router is 1.
The profile name for the Router interface. Name must be enclosed
in quotes, with a maximum length of 11 characters.
Enable or disable a frame type for the IPX protocol
Enable or disable a frame type for protocols other than IP and IPX
Ethernet II framing
IEEE 802.2 framing
IEEE 802.3 framing
LLC/SNAP framing
Disable the frame type
Enable the frame type
Compact T1 - Release 6.1