Electrical Installation and Cabling
Chassis Connectors and Buttons
Chassis Connectors and Buttons
The following illustrations show all connectors on the back of the unit.
AC Power Connector
Reset
25-Pair Telco Connectors
Interface Connectors
The following are the Compact T1 chassis interface connectors:
l
T1-1 and T1-2 line connection ports each equipped with standard
RJ-48C 8-pin connector jack
l
RS-232 craft port connector
l
Tip and Ring Analog Interfaces equipped with standard 25-pair Telco
Connectors
l
10Base-T Ethernet port to be connected to a remote management tool such as
Telnet or an SNMP-based Network Management System with an RJ-45 8-pin
connector jack
l
External Alarm Connector
l
Ground Lugs
3-4
Alarms
RS-232 Craft Port
Ground Terminals
-48V/Battery
Ethernet
[10Base-T]
T1-2
T1-1
Compact T1 - Release 6.1
T1
Connectors