Table of Contents
Advertisement
show (router) rip
The show (router) rip command displays the current RIP settings for the Router card.
Syntax:
Example:
> show 5 rip
SLOT 5:
RIP Settings for Router:
RIP Mode Receive:
RIP Mode Send:
{rtr_card-addr}
The slot number (1-6) that contains the Router (IP or CMG) card.
show (router) snmp
The show (router) snmp command displays the current SNMP settings for the specified Router
card.
Syntax:
Example:
> show 5 snmp
SLOT 5:
SNMP Settings for Router:
SNMP Communities:
SNMP Trap Destinations:
Statistics Averaging Interval:
Name:
Contact:
Location:
{rtr_card-addr}
The slot number (1-6) that contains the Router (IP or CMG) card.
Compact T1 - Release 6.1
show {rtr_card-addr} rip
show 5 rip
show {rtr_card-addr} snmp
show 5 snmp
Name
Address
public
0.0.0.0
Name
Address
public
0.0.0.0
RIP2
Rip2
Access
Read
Location
Local LAN
1 min.
unknown
unknown
unknown
CLI Commands
show
5-227
Advertisement
Table of Contents
