Black Box Compact T1 MT850A User Manual page 227

set (router) syslog level
Use the set (router) syslog level command to set the Syslog severity level. Events of all
severity levels lower in number (more severe) will be sent to the Syslog server.
Syntax:
Example:
{rtr_card-addr}
The slot number (1-6) that contains the Router (IP or CMG) card.
{severity}
The severity threshold level can range from 0 to 7.
set (router) syslog server
Use the set (router) syslog server command to set the IP address of an external Syslog
server.
Syntax:
Example:
{rtr_card-addr}
The slot number (1-6) that contains the Router (IP or CMG) card.
{ip-addr}
Set the IP address for the external Syslog server, using the form xxx.xxx.xxx.xxx, where
xxx is a number from 0 to 255.
Compact T1 - Release 6.1
set {rtr_card-addr} syslog level {severity}
set 3 syslog level 4
The example will set the Syslog severity level to 4, on the Router in
slot 3.
set {rtr_card-addr} syslog server {ip-addr}
set 3 syslog server 10.0.0.1
The example will set the external Syslog server IP address to 10.0.0.1, on the
Router in slot 3.
CLI Commands
set
5-143