Table of Contents
Advertisement
telnet
telnet (router)
Use the telnet (router) command to establish a Telnet session from the Compact T1 CLI to the
Router card menu-driven user interface.
Syntax:
Example:
> telnet 3
Connected.
Attempting Router connection...
Router [Wed Apr 24, 2002 13:00:15] (<CR> to login)
Password >******
Select a terminal type...
(<space> or <back-space> to toggle, <CR> to accept)
Terminal: <VT100>
{rtr-addr}
The Router address is in the form {slot|slot:port}.
slot
port
Compact T1 - Release 6.1
telnet {rtr-addr}
telnet 1
The example will Telnet into a Router in Slot 1.
Escape character is '^]'.
Slot location (1 - 6) of a Router (IP or CMG) card.
Port number of a Router is 1. Note: only required on IP Router when
release 1.1 or earlier.
CLI Commands
telnet
5-285
Advertisement
Table of Contents
