Status (Ds0) - Black Box Compact T1 MT850A User Manual

CLI Commands
status

status (ds0)

Use the status (ds0) command to display the current status of the specified DS0.
Syntax:
Example:
> status a:1:1
DS0
---
A:1:1
Display Descriptions
Rx AB - AB bits received by the FXS or FXO port
Tx AB -
Signal -
T1 -
TP -
{ds0-addr}
In the form of {slot:port:channel}.
slot
port
channel
5-256
status {ds0-addr}
status a:1:1
Displays the current status of the DS0s on port 1 on slot A
(controller card), port 1, channel 1.
Rx AB Tx AB
----- -----
11
AB bits transmitted by the FXS or FXO port
Signaling mode for which the port is configured
T1 Status
Trunk Processing
A for the controller card, or 1-6 for service cards.
Port number or range.
Channel number or range, for T1 ports.
Signal T1
------ ---------
01 EMW
TP
--
Traffic N
Compact T1 - Release 6.1