Table of Contents
Advertisement
CLI Commands
delete
delete (router-lan) static mac address
Use the delete (router-lan) static mac address command to delete a static MAC address
entry to the specified LAN interface.
Syntax:
Example:
{rtr_lan-addr}
The Router (IP or CMG) address is in the form {slot:port} or {slot "profile-name"}.
slot
port
"profile-name"
{mac-addr}
The MAC address to add to the learned address table for the LAN, in the form a
6-octet HEX value, 0xxxxxxxxxxxx. Please note that the MAC address is preceeded by a
0x.
delete (router-wan) firewall
Use the delete (router-wan) firewall command to delete a firewall rule from a WAN.
Syntax:
Example:
{rtr_card-addr}
The slot number (1-6) that contains the Router (IP or CMG) card.
{"wan-name"}
The WAN interface to modify. The name must be enclosed in quotes.
{all|rule-number}
all
rule-number
5-50
delete {rtr_lan-addr} static mac address {mac-addr}
delete 3:1 static mac address 0x00e09700e9cd
The example will delete a static MAC address, 00:e0:97:00:e9:cd, from the
LAN interface of the Router card in slot 5.
The slot number (1-6) that contains the Router card
Port number of the Router is 1
The profile name for the Router interface. Name must be enclosed in
quotes, with a maximum length of 11 characters
delete {rtr_card-addr} {"wan-name"} firewall
{all|rule-number}
delete 3 "LosAngeles" firewall all
The example will remove all firewalls rules on the Router in slot 3, for the
profile "LosAngeles".
Delete all firewall rules on this WAN
The specific firewall rule to delete
Compact T1 - Release 6.1
Advertisement
Table of Contents
