Set (Router) Default - Black Box Compact T1 MT850A User Manual

set (router) default

Use the set (router) default command to reset the Router card to its default configuration
settings. This command will cause the Router card to perform a reboot.
Syntax:
Example:
{rtr_card-addr}
The slot number (1-6) that contains the Router (IP or CMG) card.
Compact T1 - Release 6.1
set {rtr_card-addr} default
set 3 default
Do you really want to do this ?
OK
The example will reset the Router in slot 3 to its defaults.
CLI Commands
y
set
5-95