Load; Load Tftp - Black Box Compact T1 MT850A User Manual

load

load tftp

The load tftp command will download software via TFTP to the Controller or to the Router card
or country ring tones to the CMG router card (CMG only). Note: A TFTP server must be
running on the host system for this command to be successful.
Syntax:
Example:
> load tftp 192.168.43.52 "tdm6_1_z_all.mgm"
Filename:
Host IP Address:
Target IP Address:
'load tftp' will be executed with the above parameters.
Download to Active controller:
Type ACTIVE Software Release Key, or Hit 'Enter' for Non-Keyed
Load:
>>>
Example:
Example:
[rtr_card-addr]
The Router (IP or CMG) card slot number (1 - 6) to download the software file to.
Note: If no slot number is entered, the software is downloaded to the Controller.
{ip-addr}
The host IP address in the form of xxx.xxx.xxx.xxx, where xxx is a number from 0-255. If
not supplied the host IP address from the database will be used.
{"file-name"}
The software file to load including path. Must be enclosed with quotes.
The file-type of the downloading files must be .mgm for software and .tdb for country tones
Compact T1 - Release 6.1
load [rtr_card-addr] tftp {ip-addr} {"file-name"}
The following example will download the Controller software file
"tdm6_1_z_all.mgm" to the Controller via TFTP. At the prompt enter Software
Key or [Enter] to download non-keyed version.
tdm6_1_z_all.mgm
192.168.43.52
192.168.3.194
load 5 tftp 172.26.100.25 "rt_1_20_all.mgm"
The example will download the Router software file "rtr_1_20_all.mgm" to a
Router card in slot 5 via TFTP. Note: see the above example, the load progress
will look the same.
load 5 tftp 172.26.100.25 "brazil.tdb"
The example will download tones for Brazil to the CMG Router card in slot 5
via TFTP.
CLI Commands
load
5-59