Table of Contents
Advertisement
CLI Commands
alarms
alarms
Use the alarms command to display the active alarms. Each alarm is related to a particular
address and has a severity category (major, minor, critical, alert). The report can be filtered by
port address and/or severity.
Syntax:
Example:
Time
07:35:45 01/04/2002 Major
07:35:21 01/04/2002 Minor
07:34:57 01/04/2002 Critical Test Critical Alarm
00:00:20 01/01/2002 Major
00:00:05 01/01/2002 Major
Total=10
[slot|slot:port|slot:port:channel]
slot
port
channel
[category]
bri
ds1
env
equipment
fxo
fxs
rtr
v35
[severity]
alert
critical
info
major
minor
5-30
alarms [slot|slot:port|slot:port:channel] [category]
[severity]
alarms
Date
Severity Description
A for the controller card, or 1 - 6 for service cards.
Port number.
Channel number
All BRI facility alarms
All DS1 facility alarms
Environmental Alarms
Equipment alarms not related to a DS1 interface
All FX0 facility alarms
All FXS facility alarms
All Router facility alarms
All V.35 facility alarms
Alert alarms (threshold crossing)
Critical alarms
Information alarms
Major alarms (service effecting)
Minor alarms (non-service affecting)
Test Major Alarm
Test Minor Alarm
5:1-RTR Ethernet Link Down
A:2-DS1 Loss Of Signal
Compact T1 - Release 6.1
Advertisement
Table of Contents
