Table of Contents
Advertisement
Setup the Profile for Site C
Command
connect a:2:15 6:1:3
add 6 remote "SITE-C"
set 6:1:3 encapsulation fr
set 6 "SITE-C" trunk 3
set 6 "SITE-C" dlci 16
set 6 "SITE-C" up
add 6 "SITE-C" static ip
network 192.168.1.103
255.255.255.255 1
set snmp nms 1 192.168.0.254
Remote Site A Configuration
Command
disconnect a
set a:1:all type data
set a:2:all type data
disconnect 6
set 6:1:all type data
connect a:1:1-4 a:2:1-4
set ipds0 assign a:1:5
set ipds0 ip address
192.168.1.101 255.255.255.0
set ipds0 up
set ipds0 navalarm off
set snmp nms 1 192.168.0.254 Set up SNMP Trap address for the Compact T1
Compact T1 - Release 6.1
Setup of DS0 Management Channel
Description
Connect the timeslot to the WAN port.
Add another WAN profile named SITE-C
Specify the encapsulation for the profile
Specify the trunk number for the profile
Specify the DLCI number for the profile
Enable the profile
Specify the IP address of the Compact T1 at the far end
Set up SNMP Trap address for the Compact T1
Description
Disconnects all connections to slot a (controller)
Sets all DS0s on T1-1 to data signaling type
Sets all DS0s on T1-2 to data signaling type
Disconnects the router in slot 6
Sets all DS0s on slot 6 to data signaling type
Connect channels to cell site
Assign channel to IPDS0 management channel
Configure IPDS0 ip address
Enable IPDS0
Suppress IPDS0 alarm
Configuration
4-19
Advertisement
Table of Contents
