Black Box Compact T1 MT850A User Manual page 233

set (router) voip rtcp cname
Use the set (router) voip rtcp cname command to specify the name to be used for the
CNAME field of Real-Time Control Protocol (RTCP) packets.
Syntax:
Example:
{cmg_card-addr}
The slot number (1-6) that contains the CMG card.
{gatewayid|"name"}
Default is gatewayid.
gatewayid
name
set (router) voip rtcp interval
Use the set (router) voip rtcp interval command to specify the time interval between
RTCP reports.
Syntax:
Example:
{cmg_card-addr}
The slot number (1-6) that contains the CMG card.
{seconds}
Interval time is in seconds, range is 0 to 255. If zero, RTCP reporting is turned off. Default
is 5 seconds.
Compact T1 - Release 6.1
set {cmg_card-addr} voip rtcp cname {gatewayid|"name"}
set 3 voip rtcp cname gatewayid
The example will set the VoIP RTCP CNAME to the same as gateway ID, on
the CMG card in slot 3.
Use the gateway ID in the CNAME.
Identifying the gateway, maximum 64 characters, enclosed in quotes.
set {cmg_card-addr} voip rtcp interval {seconds}
set 3 voip rtcp interval 0
The example will turn off RTCP reporting for the CMG card in slot 3.
CLI Commands
set
5-149