Black Box Compact T1 MT850A User Manual page 215

set (router) ppp auth byremote user
Syntax:
Example:
{rtr_card-addr}
The slot number (1-6) that contains the Router (IP or CMG) card.
{profilename|"protocol-name"}
profilename
"protocol-name"
set (router) ppp auth ofremote protocol
Syntax:
Example:
{rtr_card-addr}
The slot number (1-6) that contains the Router (IP or CMG) card.
{chap|none|pap}
chap
none
pap
Compact T1 - Release 6.1
set {rtr_card-addr} ppp auth byremote user
{profilename|"protocol-name"}
set 5 ppp auth byremote user profilename
The example will set the PPP authentication user name for the Router in slot 5
to equal the profile name.
Note: A set (router) ppp auth byremote protocol command must be
completed before this command can be implemented.
Use the profile name as the CHAP or PAP user name.
The CHAP or PAP user name. A maximum of 16 characters,
enclosed in quotes.
set {rtr_card-addr} ppp auth ofremote protocol
{chap|none|pap}
set 5 ppp auth ofremote protocol none
The example will set the Router in slot 5 to not allow PPP authentication of this
Adit by the router.
Set to the CHAP protocol.
The remote PPP device cannot authenticate this Adit (Default).
Set to the PAP protocol.
CLI Commands
set
5-131