Black Box Compact T1 MT850A User Manual page 184

CLI Commands
set
set (router) dhcp server startaddr
Use the set (router) dhcp server startaddr command to enable the DHCP server on the
specified Router card.
Syntax:
Example:
{rtr_card-addr}
The slot number (1-6) that contains the Router (IP or CMG) card.
{ip-addr}
The starting address of the client address pool, in the form of xxx.xxx.xxx.xxx, where xxx
is between 0-255.
{count}
The number of IP addresses in the client address pool (1-254).
5-100
set {rtr_card-addr} dhcp server startaddr
{ip-addr} {count}
set 4 dhcp server startaddr 134.200.3.1 254
The example will set the Router in slot 4 to enable the DHCP server with 254
address pool starting at 134.200.3.1.
Compact T1 - Release 6.1