Set (Ocudp) Loopdetect - Black Box Compact T1 MT850A User Manual

CLI Commands
set

set (ocudp) loopdetect

Use the set (ocudp) loopdetect to configure the OCU non-latching/latching loopback code
detection.
Syntax:
Example:
{ocudp-addr}
The {slot:port} address of the OCU-DP card to apply the changes to.
slot
port
{csu|dsu|ocu}
csu
dsu
ocu
{llb|nllb}
llb
nllb
{disable|enable}
disable
enable
5-88
set {ocudp-addr} loopdetect {csu|dsu|ocu} {llb|nllb}
{disable|enable}
set 3:2 loopdetect csu llb enable
Slot number (1-6) where the OCU-DP is located
Port number or range.
Set CSU manual loop codes detection
Set DSU manual loop codes detection
Set OCU manual loop codes detection
Set up latching loopback detection
Set up non-latching loopback detection
Disable loop detection
Enable loop detection
Compact T1 - Release 6.1