Table of Contents
Advertisement
status (fxs5G)
Use the status (fxs5G) to display the current near-end line status of the specified FXS 5G card.
Syntax:
Example:
> status 4:1
FXS
---
4:1
{fxs5G-addr}
slot
port
Display Descriptions
DS0 -
Rx AB - AB bits received by the FXS or FXO port (real-time)
Tx AB -
Signal -
T1 -
TP -
Compact T1 - Release 6.1
status {fxs5G-addr}
status 4:1
The example displays status of port 1 (FXS 5G) on slot 4.
Rx AB
Tx AB
Signal=>T1 Sig
-----
-----
--------------
01
01
The slot number (1-6) that contains the FXS 5G card
Port number or range.
Identifies location of DS0
AB bits transmitted by the FXS or FXO port (real-time)
Signaling mode for which the FXS or FXO port is configured
gs
Set to Ground Start signaling
gsrb
Set to Ground Start signaling with reverse battery
gsw
Set to Ground Start Wink signaling
gswb
Set to Ground Start Wink signalling with reverse battery
ls
Set to Loop Start signaling
lsrb
Set to Loop Start signaling with reverse battery
Status of the T1 (Traffic, Loss of Signal, Loss of Framing, Loopback)
Trunk Processing (Y = yes, N = no)
T1
-----------------
LS => LS
Traffic
CLI Commands
status
TP
--
N
5-261
Advertisement
Table of Contents
