Delete (Router-Lan) Filter - Black Box Compact T1 MT850A User Manual

delete (router-lan) filter

Use the delete (router-lan) filter command to delete a single filter rule from the table of Layer
2 filters applied to the specified LAN interface.
Syntax:
Example:
{rtr_lan-addr}
The Router (IP or CMG) address is in the form {slot:port} or {slot "profile-name"}.
slot
port
"profile-name"
{address|custom|protocol|all}
address
custom
protocol
all
{"filter-name"}
A symbolic name given to identify a filter rule. This name must be enclosed in quotes, with
a maximum of 8 characters.
Compact T1 - Release 6.1
delete {rtr_lan-addr} filter
{address|custom|protocol|all} ["filter-name"]
delete 2:1 filter address "Server1"
This example will delete a previously created address filter names "Server1".
Slot number (1-6) that contains the Router card
Port number of the Router is 1
The profile name for the Router interface. Name must be enclosed in
quotes, with a maximum length of 11 characters.
A previously created address filter
A previously created custom filter
A previously created protocol filter
All filter rules. this options does not require a filter-name to follow
CLI Commands
delete
5-45