Set (Router) Lmi; Set (Router) Lmi Poll - Black Box Compact T1 MT850A User Manual

CLI Commands
set

set (router) lmi

Use the set (router) lmi command to specify the Local Management Interface (LMI) protocol
to use for the specified Router card.
Syntax:
Example:
{rtr_card-addr}
The slot number (1-6) that contains the Router (IP or CMG) card.
{annexd|disable|lmi}
annexd
disable
lmi

set (router) lmi poll

Use the set (router) lmi poll command to specify the Local Management Interface (LMI) for
the specified Router card.
Syntax:
Example:
{rtr_card-addr}
The slot number (1-6) that contains the Router (IP or CMG) card.
{counter|interval}
counter
interval
5-104
set {rtr_card-addr} lmi {annexd|disable|lmi}
set 5 lmi annexd
The example will configure LMI on the Router card in slot 5 to
Annex D.
Set LMI to Annex D.
Disable LMI on the Router.
Set LMI to LMI rev1 (DLCI 1023)
set {rtr_card-addr} lmi poll {counter|interval}
{value}
set 5 lmi poll counter 15
The example will configure LMI poll count to 15, on the Router card in slot 5.
Set the LMI count.
{value} = count of how many link status enquiries can go
un-responded before the link is declared down. Range is 0-255.
Set LMI period
{value} = LMI period. Range is between 0-255 seconds.
Compact T1 - Release 6.1