CLI Commands
show
show (router-wan) static ip address
The show (router-wan) static ip address command displays the current list of static IP address
entries for the specified WAN interface.
Syntax:
Example:
> show 5 "LosAngeles" static ip address
SLOT 5:
WAN Static IP Address Settings for LosAngeles:
{rtr_card-addr}
The slot number (1-6) that contains the Router (IP or CMG) card.
{"wan-name"}
The WAN interface to modify. The name must be enclosed in quotes.
show (router-wan) static ip network
The show (router-wan) static ip network command displays the current list of static IP
network entries for the specified WAN interface.
Syntax:
Example:
> show 5 "LosAngeles" static ip network
SLOT 5:
WAN Static IP Network Settings for LosAngeles:
{rtr_card-addr}
The slot number (1-6) that contains the Router (IP or CMG) card.
{"wan-name"}
The WAN interface to modify. The name must be enclosed in quotes.
5-244
show {rtr_card-addr} {"wan-name"} static ip address
show 5 "LosAngeles" static ip address
Total: 0
show {rtr_card-addr} {"wan-name"} static ip network
show 5 "LosAngeles" static ip network
Network
Subnet Mask
200.1.1.0
Total: 1
Metric
255.255.255.0
Remote Tunnel Addr
1
Compact T1 - Release 6.1