Set (Router-Lan) Filter Forward - Black Box Compact T1 MT850A User Manual

set (router-lan) filter forward

Use the set (router-lan) filter forward command to specify the forwarding mode for Layer 2
filters on the LAN interface.
Syntax:
Example:
{rtr_lan-addr}
The Router (IP or CMG) address is in the form {slot:port} or {slot "profile-name"}.
slot
port
"profile-name"
{matching|nontmatching}
matching
notmatching
Compact T1 - Release 6.1
set {rtr_lan-addr} filter forward
{matching|nontmatching}
set 3:1 filter forward notmatching
The slot number (1-6) that contains the Router card.
Port number of the Router is 1.
The profile name for the Router interface. Name must be enclosed
in quotes, with a maximum length of 11 characters.
Only those frames matching a rule will be forwarded.
Only those frames NOT matching a rule will be forwarded.
CLI Commands
set
5-155