Table of Contents
Advertisement
CLI Commands
set
set (router-voice) echo tail
Use the set (router-voice) echo tail command to set the maximum round-trip delay expected
in the voice path between the CMG and the phone, including acoustical delay at the phone. This
command applies to the CMG Router card only.
Syntax:
Example:
{cmg_voice-addr}
In the form {slot:voip:port}
slot
voip
channel
{milliseconds}
Valid values: 8, 16, 24, 32 and 64. Default is 16 milliseconds.
5-174
set {cmg_voice-addr} echo tail {milliseconds}
set 2:1:1:all echo tail 8
The example will set the echo tail to 8 milliseconds for all voice channels on the
CMG card in slot 2.
The slot number (1-6) that contains the CMG card.
To designate VoIP 1:1 is used.
Channel number for the router is 1-48, range or all
Compact T1 - Release 6.1
Advertisement
Table of Contents
