Table of Contents
Advertisement
OCU-DP Card
Technical Specifications
Technical Specifications
Controller Software Required
T1 Controller
l
Release 3.2 or higher is required
Service Interface
l
Single-port OCU-DP interface
-
One RJ-48S front-panel jack
-
Strap selections for rear-panel RJ-21X telco connector
l
Four-port OCU-DP interface
-
Four RJ-48S front-panel jack
-
Strap selections for rear-panel RJ-21X telco connector
Network Interface
l
Each OCU port DS0 cross-connected to T1 port
Loopbacks
OCU, CSU and DSU:
l
Manual loopbacks activate via CLI
l
Non-latching loopbacks activate via network code
l
Latching loopbacks activate via network code
Clocking
l
Loop-timed from any T1 in the platform
l
Sources clock to the DTE device
10-6
Compact T1 - Release 6.1
Advertisement
Table of Contents
