Black Box Compact T1 MT850A User Manual page 225

set (router) stp enable/disable
Use the set (router) stp enable/disable command to enable and disable Spanning Tree
Protocol on the Router.
Syntax:
Example:
{rtr_card-addr}
The slot number (1-6) that contains the Router (IP or CMG) card.
Note: Enter {slot} only. If {slot:port} is entered the command will be directed to the
Router LAN and not the Router Card.
{disable|enable}
disable
enable
Compact T1 - Release 6.1
set {rtr_card-addr} stp {disable|enable}
set 3 stp enable
The example will enable Spanning Tree on the Router in slot 3.
Disable Spanning Tree protocol
Enable Spanning Tree protocol
CLI Commands
set
5-141